All Categories

New Products

Home > Products > PTFE oven liner > PTFE Modified Rod M111 ROD TFM Rod

PTFE Modified Rod M111 ROD TFM Rod

Payment Type:	L/C,T/T,D/P,Paypal,Money Gram,Western Union
Terms of Trade:	FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:	100 Kilogram
Delivery Time:	3-14 Days

Packaging:	plastic and carton
Brand:	Prochema
Transportation:	Ocean,Land,Air
Place of Origin:	China
Certificate:	MSDS
HS Code:	39209910
Port:	Shanghai,Shenzhen

Basic Info

Model No.: ptfe rod

Product Description

Fluoroplastic Products > PTFE Products > PTFE Modified Rod M111 ROD TFM Rod

PTFE modified rod M111 ROD TFM rod

Name: Imported ptfe rod/tube/sheet

Material: Japan Daikin M111/M112;

America 3M TFM1600/1700;

Typical poperties of TFM

TFM is a high density polymer with low permeability, excellent bending life and no deformation under higher loads.

Very good electrical and mechanical properties, elastic modulus increased

High heat and chemical resistance, specific gravity 2.16-2.18g/cm3

Operating temperature range (-200°C to 260°C) instant temperature up to 280°

TFM material has chemical and physical properties that exceed those of PTFE. Advantages include

TFM material used in microwave digestion tank inner cup characteristics:

High and low temperature resistance: -200 ~ +260℃

Compared with PTFE: better deformation resistance, permeability resistance, recoverability and slightly better transparency under high temperature and pressure

After special process finishing, sealing performance is good

With extremely high surface finish, inner and outer walls smooth without water, easy to clean

Strong acid and alkali resistance, aqua aqua, hydrofluoric acid, various organic solvents, etc

Very low metal dissolution and precipitation, pollution prevention, and non-adhesion samples, suitable for trace, ultrattrace, trace analysis, etc

It is often used for microwave digestion in a pot

Benefits:

Reduce the cold flow

Greatly reduce the load deformation

Due to low density, porosity, permeability of the polymer structure and low porosity

Improved pressure recovery, especially at higher temperatures

Smooth surface

Non - adhesive and dielectric properties

High modulus of elasticity

Increased flexibility

Compared with ordinary domestic materials, it has more outstanding creep resistance, stronger tensile properties and more outstanding wear resistance effect!

Applications

Electrodes, anodes, cathodes, resistors, whisking rods, special structural parts, etc.

In metallurgy, mechanical engineering,Chemical & electrochemical industry, glass & ceramics and other industries.

Typical Sizes

Diameter (mm) 2-30
Length (mm) 300-600
* Other diameters and lengths are available on request.

PTFE rods are a combination of gaskets, sealants and smooth materials for processing in a variety of corrosive media. What are the advantages of PTFE bars in use, including electrical insulating parts used at various frequencies

F4 bar application: PtFE bar can be pushed or extruded to form; For high temperature wire, it can also be made into a film and then cut into the shaft to install PTFE tape for the production of high frequency cable. It can be made directly into water dispersion liquid, which can be used for coating, impregnation or fiber.

Ptfe in atomic energy, defence, aerospace, electronics, electrical, chemical, machinery, instruments, meters, construction, textile, metal surface treatment, pharmaceutical, medical, food, metallurgical smelting and other industries widely used for high and low temperature resistance, corrosion resistant materials, insulation materials, anti-sticking coating, etc.

Used as anticorrosive material:

PTFE rod material overcomes the shortcomings of general plastics, metals and other non-corrosion resistant materials, and has become the primary corrosion resistant materials for petroleum, chemical and textile professions, such as the manufacture of transport pipes, exhaust pipes, steam pipes, etc. for the transport of corrosive gases

As an oil-free smooth material:

The friction coefficient of PTFE rod is low, so it is an ideal material for oil-free and smooth filling of mechanical equipment parts, such as papermaking, food, textile, etc. The addition of smooth oil can easily pollute the product. PTFE rod solves this problem.

High level dielectric materials for electronic equipment:

PTFE rods inherent in the dielectric constant and low loss makes it the wire and cable insulation materials, its porous structure can make the loss and distortion dropped to a lower, and a hot not disorderly and must be flexible, PTFE rods is still a prominent filling medium material, widely used in the category of computer, national defense and so on many challenging.

Used as anti-stick material:

PTFE bar with its inherent low surface tension, does not adhere to any substances, but also has high and low temperature resistance, non-toxic good properties, PTFE bar is primarily used in non-stick pan and microwave oven liner.

Used as medical materials:

PTFE rod has good mechanical function, durability and biological adaptability, which will not cause body reaction and has no side effects on human physiology. Moreover, PTFE rod has the characteristics of multi-pore structure, which is increasingly widely used in medicine. These include artificial blood vessels and patches for soft tissue regeneration, and surgical sutures for blood vessels, hearts, general surgery, and plastic surgery.

PROPERTIES

Item	Unit	Data
Density	g/cm3	2．1-2．3
bending strength	Mpa	11-14
tensile strength	MPa	21-28
elongation at break	%	≥200
friction coefficient	/	0.04
water absorption	%	<19
dielectric strength	KV/mm	18
operating temperature	℃	-180-260
melting temperature	℃	325

Specification :

Moulded rod: Dia8-500mm X Length 100-200mm

Extrusion rod:Dia5-170mm xLength 1000mm

Mianyang Prochema Commercial Co.,Ltd.

Mianyang Prochema started from 2004 with high performance special films in conductive film, insulation film and printing film fields.With strong market knowledge and great sources Prochema expanded service to many professional applications.

2004--Mianyang Prochema started high performance insulation films including UL V0 Flame retardant Polycarbonate film, PP film,PET film and polyimide film series.

2007--Our Hongkong company-Gus Industry (hongkong) Co., limited was set up for global marketing of coated film,including ITO PET transparent conductive film, texture hardcoated PET film,offset pp synthetic paper.

2008--Our Shenzhen factory was set up to produce our own branded coated films.

2016---Mianyang prochema was proudly elected as Vice Chairman of Mianyang Commerce Association, and organize an Exporter Alliance under local government supervision,to help association members' products market worldwide.

2020--Mianyang Prochema actively and non-profitly helped local government arrange and export Covid-19 epidemic products donations to many countries.

Company Info

Company Name: Mianyang Prochema Commercial Co.,Ltd.
Representative: Zhang Chuanbao
Product/Service: EMI Rfid Shielding Film , Textured HC PET Film , Synthetic Paper , ITO PET Film , Fluoroplastic And PEEK Products , Perfluorinated ION Exchange Membrane
Capital (Million US $): 500000RMB
Year Established: 2004
Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
Export Percentage: 81% - 90%
Total Annual Purchase Volume (Million US $): Below US$1 Million
No. of Production Lines: 2
No. of R&D Staff: Fewer than 5 People
No. of QC Staff: Fewer than 5 People
OEM Services Provided: yes
Factory Size (Sq.meters): 1,000-3,000 square meters
Factory Location: Bldg A1,Fuqiao No.6 Industry Park,Fuyong,Shenzhen,Guangdong,China
Contact Person: Mr. GUS ZHANG
Tel: +86-816-2202612

Email to this supplier

*Subject:
To:
*Messages:

Your message must be between 20-8000 characters

Premium Related Products

Other Products

Hot Products

Polyester Spiral Filter Cloth Made in China Woven Fabric Dryer Mesh Belt Polyester / Nylon Silk Printing Screen Mesh/Belt/ Cloth Polyester Forming Mesh Belt Polyeste Car Carpet Felt for Car Water Proof Oil-Proof Polyester Filter Bag for Air Filteration Geo Bag for Construction Material PE Water Saving Drip Irrigation Pipe with Round Drippers Double Layer Geotextile Single Layer Geomembrane Compound Geomembrane Pet Composite Geotechnological Geomembrane Film Submerged Arc Welding Flux for Steel Structure (sj101)Woven 100% Cotton Grey Fabric Non Woven Needle Punched Polyester Waterproof Geotextile Material Needle Punch Double Color Jacquard Carpet for Exhibition Carpet Waterproof Anti-Slip Door Mat Carpe with PVC Backing Polyester Non-Woven Plain Red Exhition Carpet